Arc length and curvature
A steel handrail winds around a round column as it climbs. How long is it, and how sharply does it bend at each point, measured so that the answer belongs to the rail and not to the speed of a hand sliding along it?
Where you are 5 in Vectors and space curves
Why this exists
Arc length and speed on parametric and polar curves found the length of a plane curve by integrating its speed; in space the integrand gains a third term. But a curve can be traced at many speeds, so its length must be shown not to depend on the parametrization. And “how sharply it bends” needs a number. The derivative \mathbf{r}' of Vector-valued functions will not do: it doubles when we trace twice as fast, though the curve has not changed.
The answer to both is to measure along the curve. Arc length becomes a parameter, and curvature is the rate at which the direction of motion turns per unit of length. A line has curvature 0 and a circle of radius a has curvature \displaystyle \frac{1}{a}.
Definition
Throughout, \mathbf{r} is smooth on an interval: \mathbf{r}' is continuous and never \mathbf{0} (Vector-valued functions). A plane curve is the case z(t) = 0.
Arc length. The length of the curve traced by \mathbf{r} on [a, b] is
The arc length function with base point \mathbf{r}(a) is s(t) = \int_a^t \lVert \mathbf{r}'(u) \rVert\,du, negative for t < a. A parametrization with \lVert \mathbf{r}'(t) \rVert = 1 for every t has s(t) = t - a; it is parametrized by arc length, and its parameter is usually called s.
Unit tangent. \mathbf{T}(t) = \dfrac{\mathbf{r}'(t)}{\lVert \mathbf{r}'(t) \rVert}.
Curvature. Let \mathbf{r} also be twice differentiable; then \displaystyle \lVert \mathbf{r}' \rVert = \sqrt{\mathbf{r}' \cdot \mathbf{r}'} and \mathbf{T} are differentiable. The curvature at t is
where \displaystyle \frac{d\mathbf{T}}{ds} is the derivative of \mathbf{T}(t(s)) and t(s) is the inverse of the arc length function (Theorem 2). Where \kappa > 0, the radius of curvature is \displaystyle \frac{1}{\kappa}.
Normal and binormal. Since \lVert \mathbf{T} \rVert = 1, Theorem 3 of Vector-valued functions gives \mathbf{T} \cdot \mathbf{T}' = 0. Where \mathbf{T}'(t) \ne \mathbf{0}, the principal unit normal is \mathbf{N}(t) = \dfrac{\mathbf{T}'(t)}{\lVert \mathbf{T}'(t) \rVert}, a unit vector perpendicular to \mathbf{T}, and the binormal is \mathbf{B} = \mathbf{T} \times \mathbf{N}; by The cross product and the triple product, \mathbf{T}, \mathbf{N}, \mathbf{B} are mutually perpendicular unit vectors in right-hand order. The plane through \mathbf{r}(t) spanned by \mathbf{T} and \mathbf{N} is the osculating plane, and the circle in it with center \displaystyle \mathbf{r}(t) + \frac{1}{\kappa}\mathbf{N}(t) and radius \displaystyle \frac{1}{\kappa} is the osculating circle.
Intuition
Join points along the curve by chords. A short chord \mathbf{r}(t_i) - \mathbf{r}(t_{i-1}) is close to \mathbf{r}'(t_i)\,\Delta t_i, so the polygon’s length is close to a Riemann sum for L. Theorem 1 makes this exact, as Arc length did for graphs.
For curvature, walk a circle of radius a. After an arc of length s the radius has turned through the angle \displaystyle \frac{s}{a}, and so has the tangent, perpendicular to it: the direction changes at \displaystyle \frac{1}{a} radian per unit of length. On any curve, if \mathbf{T} turns through a small angle \Delta\theta over a length \Delta s, then \displaystyle \lVert \Delta\mathbf{T} \rVert = 2\sin\frac{\Delta\theta}{2}, a chord of the unit circle, which is \Delta\theta to first order. So \kappa is the turning rate \displaystyle \lim \frac{\Delta\theta}{\Delta s}; dividing by \Delta s rather than \Delta t removes the speed. The normal \mathbf{N} points the way \mathbf{T} is turning, toward the inside of the bend.
Results
Theorem 1 (polygons). Let \mathbf{r}' be continuous on [a, b]. Every polygon inscribed at a = t_0 < t_1 < \dots < t_n = b has length at most L, and the lengths of these polygons tend to L as \max \Delta t_i \to 0.
Theorem 2 (arc length as parameter). Let \mathbf{r} be smooth on [a, b] with length L. Then s'(t) = \lVert \mathbf{r}'(t) \rVert > 0, s maps [a, b] one-to-one onto [0, L], and its inverse t(s) is differentiable with t'(s) = \dfrac{1}{\lVert \mathbf{r}'(t(s)) \rVert}. The function \mathbf{q}(s) = \mathbf{r}(t(s)) traces the same curve in the same order, with \mathbf{q}'(s) = \mathbf{T}(t(s)), so \lVert \mathbf{q}'(s) \rVert = 1.
Theorem 3 (computing curvature). Let \mathbf{r} be smooth and twice differentiable.
- (a) \kappa(t) = \dfrac{\lVert \mathbf{T}'(t) \rVert}{\lVert \mathbf{r}'(t) \rVert}; so \mathbf{N}(t) exists exactly where \kappa(t) > 0.
- (b) \kappa(t) = \dfrac{\lVert \mathbf{r}'(t) \times \mathbf{r}''(t) \rVert}{\lVert \mathbf{r}'(t) \rVert^3}.
- (c) The graph of a twice differentiable f in the xy-plane has \kappa(x) = \dfrac{\lvert f''(x) \rvert}{(1 + f'(x)^2)^{3/2}}.
- (d) A circle of radius a has curvature \displaystyle \frac{1}{a} at every point.
Theorem 4 (the curve, not the parametrization). Let \varphi : [c, d] \to [a, b] be continuously differentiable and onto with \varphi'(u) \ne 0 for every u, let \mathbf{r} be smooth on [a, b], and let \mathbf{q} = \mathbf{r} \circ \varphi. Then \mathbf{q} is smooth and
- (a) \mathbf{q} on [c, d] has the same length as \mathbf{r} on [a, b];
- (b) \mathbf{T}_{\mathbf{q}}(u) = \mathbf{T}(\varphi(u)) if \varphi' > 0, and -\mathbf{T}(\varphi(u)) if \varphi' < 0;
- (c) if \mathbf{r} and \varphi are twice differentiable, \kappa_{\mathbf{q}}(u) = \kappa(\varphi(u)), and \mathbf{N}_{\mathbf{q}}(u) = \mathbf{N}(\varphi(u)) wherever \kappa > 0.
Theorem 5 (zero curvature). Let \mathbf{r} be smooth and twice differentiable on an interval I. Then \kappa(t) = 0 for every t \in I if and only if all the points \mathbf{r}(t), t \in I, lie on one line.
Why it is true
Theorem 1. By Theorem 4(a) of Vector-valued functions each chord is \int_{t_{i-1}}^{t_i} \mathbf{r}'(t)\,dt, and by Theorem 4(c) there its length is at most \int_{t_{i-1}}^{t_i} \lVert \mathbf{r}'(t) \rVert\,dt. Adding over i gives polygon length \le L.
For the limit we use a fact proved in Real Analysis: a function continuous on a closed interval is uniformly continuous. So for \varepsilon > 0 there is \delta > 0 with \lVert \mathbf{r}'(t) - \mathbf{r}'(u) \rVert < \varepsilon whenever \lvert t - u \rvert < \delta. If every \Delta t_i < \delta, then
Since \big\lvert \lVert \mathbf{p} \rVert - \lVert \mathbf{w} \rVert \big\rvert \le \lVert \mathbf{p} - \mathbf{w} \rVert, the polygon is within \varepsilon(b - a) of the Riemann sum \sum \lVert \mathbf{r}'(t_i) \rVert\,\Delta t_i. The Riemann sums tend to L (The definite integral as a limit of Riemann sums), so the polygon lengths do too.
Theorem 2. By the fundamental theorem of calculus s' = \lVert \mathbf{r}' \rVert, continuous and positive, so s is strictly increasing and continuous from s(a) = 0 to s(b) = L, and by the intermediate value theorem maps [a, b] onto [0, L]. The derivative of an inverse function gives \displaystyle t'(s) = \frac{1}{s'(t(s))}. By the chain rule, Theorem 2(e) of Vector-valued functions, \mathbf{q}'(s) = t'(s)\,\mathbf{r}'(t(s)), which is \mathbf{T}(t(s)).
Theorem 3. (a) By the chain rule, \displaystyle \frac{d}{ds}\mathbf{T}(t(s)) = t'(s)\,\mathbf{T}'(t(s)) = \frac{\mathbf{T}'(t)}{\lVert \mathbf{r}'(t) \rVert}; take lengths.
(b) Write v = \lVert \mathbf{r}' \rVert, so \mathbf{r}' = v\,\mathbf{T} and, by the product rule, \mathbf{r}'' = v'\,\mathbf{T} + v\,\mathbf{T}'. Since \mathbf{T} \times \mathbf{T} = \mathbf{0},
The length of a cross product is the product of the lengths times the sine of the angle between them (The cross product and the triple product). As \mathbf{T} \perp \mathbf{T}' and \lVert \mathbf{T} \rVert = 1, \lVert \mathbf{T} \times \mathbf{T}' \rVert = \lVert \mathbf{T}' \rVert, so \lVert \mathbf{r}' \times \mathbf{r}'' \rVert = v^2 \lVert \mathbf{T}' \rVert = v^3 \kappa by (a).
(c) Apply (b) to \langle x, f(x), 0 \rangle: \mathbf{r}' = \langle 1, f', 0 \rangle, \mathbf{r}'' = \langle 0, f'', 0 \rangle and \mathbf{r}' \times \mathbf{r}'' = \langle 0, 0, f'' \rangle.
(d) Shifting a curve by a fixed vector changes no derivative, so take \langle a\cos t, a\sin t, 0 \rangle: \mathbf{r}' \times \mathbf{r}'' = \langle 0, 0, a^2 \rangle and \lVert \mathbf{r}' \rVert = a, so \displaystyle \kappa = \frac{a^2}{a^3}.
Theorem 4. By the chain rule \mathbf{q}'(u) = \varphi'(u)\,\mathbf{r}'(\varphi(u)), continuous and never \mathbf{0}. Being continuous and never 0, \varphi' keeps one sign (intermediate value theorem).
(a) If \varphi' > 0, then \varphi(c) = a, \varphi(d) = b, and the substitution t = \varphi(u) gives
If \varphi' < 0, then \varphi(c) = b, \varphi(d) = a and \lVert \mathbf{q}' \rVert = -\varphi'\,\lVert \mathbf{r}'(\varphi) \rVert; the same substitution gives -\int_b^a = \int_a^b.
(b) \displaystyle \mathbf{T}_{\mathbf{q}}(u) = \frac{\varphi'(u)}{\lvert \varphi'(u) \rvert}\,\mathbf{T}(\varphi(u)), and \displaystyle \frac{\varphi'}{\lvert \varphi' \rvert} = \pm 1.
(c) Differentiating (b), \mathbf{T}_{\mathbf{q}}'(u) = \lvert \varphi'(u) \rvert\,\mathbf{T}'(\varphi(u)) in both cases. Theorem 3(a) divides this length by \lVert \mathbf{q}' \rVert = \lvert \varphi' \rvert\,\lVert \mathbf{r}'(\varphi) \rVert, giving \kappa(\varphi(u)), and \mathbf{T}_{\mathbf{q}}' is a positive multiple of \mathbf{T}'(\varphi(u)), so the normals agree.
Theorem 5. If \kappa = 0 on I, then \mathbf{T}' = \mathbf{0} by Theorem 3(a), so \mathbf{T} is a constant unit vector \mathbf{T}_0 (Exercise 16 of Vector-valued functions). Fix t_1 \in I. Integrating \mathbf{r}' = \lVert \mathbf{r}' \rVert\,\mathbf{T}_0 gives \mathbf{r}(t) = \mathbf{r}(t_1) + (s(t) - s(t_1))\,\mathbf{T}_0, a point of one line.
Conversely, if every \mathbf{r}(t) lies on the line \mathbf{p} + \lambda\mathbf{v} with \lVert \mathbf{v} \rVert = 1, then \mathbf{r}(t) = \mathbf{p} + g(t)\,\mathbf{v} with g(t) = (\mathbf{r}(t) - \mathbf{p}) \cdot \mathbf{v} differentiable, and \mathbf{r}' = g'\,\mathbf{v} \ne \mathbf{0}. So g' is continuous and never 0, has one sign, and \mathbf{T} = \pm\mathbf{v} is constant: \kappa = 0.
Worked examples
A length that comes out exact
Find the length of \mathbf{r}(t) = \langle t^2, 2t, \ln t \rangle, 1 \le t \le 3, and compare it with the distance between its endpoints.
SolutionHere \displaystyle \mathbf{r}'(t) = \left\langle 2t, 2, \frac{1}{t} \right\rangle, continuous on [1, 3] and never \mathbf{0}, so \mathbf{r} is smooth. The square of its length is a perfect square,
and \displaystyle 2t + \frac{1}{t} > 0, so \displaystyle \lVert \mathbf{r}'(t) \rVert = 2t + \frac{1}{t}. Then
The endpoints (1, 2, 0) and (9, 6, \ln 3) are \displaystyle \sqrt{64 + 16 + (\ln 3)^2} \approx 9.01 apart, slightly less than L.
Andre’s handrail
Andre bends a steel handrail to wind around a round column as it climbs. With the z-axis up the axis of the column and lengths in meters, the centerline of the rail is
Mei, who orders the steel, needs its length and how sharply it bends. Find the length, reparametrize by arc length, and find \mathbf{T}, \mathbf{N} and \kappa.
SolutionHere \mathbf{r}'(t) = \langle -1.2\sin t, 1.2\cos t, 0.5 \rangle, with length \displaystyle \sqrt{1.44 + 0.25} = 1.3 for every t. The length of the two turns is \int_0^{4\pi} 1.3\,dt = 5.2\pi \approx 16.34 meters, for a rise of 2\pi \approx 6.28 meters.
The arc length function is s = 1.3t, so \displaystyle t = \frac{10s}{13} and, by Theorem 2, for 0 \le s \le 5.2\pi,
Its derivative is the unit tangent,
and differentiating again,
So \displaystyle \kappa = \frac{120}{169} \approx 0.710 per meter at every point, and \displaystyle \mathbf{N} = \left\langle -\cos\frac{10s}{13}, -\sin\frac{10s}{13}, 0 \right\rangle is horizontal and points from the rail straight at the axis. The radius of curvature is \displaystyle \frac{169}{120} \approx 1.41 meters: the rail bends more gently than the circle of radius 1.2 beneath it, because the climb stretches each turn over a longer length.
Curvature from the cross product
Let \displaystyle \mathbf{r}(t) = \left\langle t, t^2, \frac{2}{3}t^3 \right\rangle. Find \kappa(t), where the curve bends most, and the osculating circle at the origin.
SolutionHere \mathbf{r}' = \langle 1, 2t, 2t^2 \rangle and \lVert \mathbf{r}' \rVert^2 = 1 + 4t^2 + 4t^4 = (1 + 2t^2)^2, so \lVert \mathbf{r}' \rVert = 1 + 2t^2. With \mathbf{r}'' = \langle 0, 2, 4t \rangle, expanding the determinant along its first row,
of length \displaystyle 2\sqrt{4t^4 + 4t^2 + 1} = 2(1 + 2t^2). By Theorem 3(b),
The curvature is largest, 2, at t = 0 only, and tends to 0 as \lvert t \rvert \to \infty.
Next, \displaystyle \mathbf{T}(t) = \frac{1}{1 + 2t^2}\langle 1, 2t, 2t^2 \rangle. The scalar factor has derivative \displaystyle \frac{-4t}{(1 + 2t^2)^2}, which is 0 at t = 0, so by the product rule \mathbf{T}'(0) = \langle 0, 2, 0 \rangle. Hence \mathbf{T}(0) = \mathbf{i}, \mathbf{N}(0) = \mathbf{j}, \mathbf{B}(0) = \mathbf{k}, the osculating plane is z = 0, and the osculating circle has center \displaystyle \left(0, \frac{1}{2}, 0\right) and radius \displaystyle \frac{1}{2}.
An ellipse and its two extreme circles
Find the curvature of the ellipse \mathbf{r}(t) = \langle 5\cos t, 3\sin t, 0 \rangle, its largest and smallest values, and the osculating circles at (5, 0) and (0, 3).
SolutionHere \mathbf{r}' = \langle -5\sin t, 3\cos t, 0 \rangle and \mathbf{r}'' = \langle -5\cos t, -3\sin t, 0 \rangle, so \mathbf{r}' \times \mathbf{r}'' = \langle 0, 0, 15 \rangle, and \lVert \mathbf{r}' \rVert^2 = 25\sin^2 t + 9\cos^2 t = 9 + 16\sin^2 t. By Theorem 3(b),
Where \sin t = 0 the curvature is largest, \displaystyle \frac{15}{27} = \frac{5}{9}, at (\pm 5, 0); where \sin^2 t = 1 it is smallest, \displaystyle \frac{15}{125} = \frac{3}{25}, at (0, \pm 3).
For the normals, \mathbf{T} = (9 + 16\sin^2 t)^{-1/2}\,\mathbf{r}', and the scalar factor has derivative \displaystyle \frac{-16\sin t\cos t}{(9 + 16\sin^2 t)^{3/2}}, zero at t = 0 and \displaystyle t = \frac{\pi}{2}. There \displaystyle \mathbf{T}' = \frac{\mathbf{r}''}{\lVert \mathbf{r}' \rVert}. At t = 0 this is \displaystyle \left\langle -\frac{5}{3}, 0, 0 \right\rangle, so \mathbf{N} = \langle -1, 0, 0 \rangle, and the osculating circle at (5, 0) has radius \displaystyle \frac{9}{5} and center \displaystyle \left(\frac{16}{5}, 0\right). At \displaystyle t = \frac{\pi}{2} it is \displaystyle \left\langle 0, -\frac{3}{5}, 0 \right\rangle, so \mathbf{N} = \langle 0, -1, 0 \rangle, and the circle at (0, 3) has radius \displaystyle \frac{25}{3} and center \displaystyle \left(0, -\frac{16}{3}\right).
A proof: a curve on a sphere bends at least as much as the sphere
Prove that if a smooth, twice differentiable curve lies on a sphere of radius R, its curvature is at least \displaystyle \frac{1}{R} at every point. Illustrate with the circle where the sphere x^2 + y^2 + z^2 = 25 meets the plane z = 3.
SolutionParametrize by arc length; by Theorem 2 and the definition of \kappa, \mathbf{q}' = \mathbf{T} and \kappa = \lVert \mathbf{T}' \rVert, with \displaystyle ' = \frac{d}{ds}. Let \mathbf{c} be the center and \mathbf{w}(s) = \mathbf{q}(s) - \mathbf{c}, so \lVert \mathbf{w} \rVert = R and \mathbf{w}' = \mathbf{T}. Constant length gives \mathbf{w} \cdot \mathbf{w}' = 0 (Theorem 3 of Vector-valued functions), that is, \mathbf{w} \cdot \mathbf{T} = 0. Differentiate with the dot product rule:
so \mathbf{w} \cdot \mathbf{T}' = -1. Since \lvert \mathbf{w} \cdot \mathbf{T}' \rvert \le \lVert \mathbf{w} \rVert\,\lVert \mathbf{T}' \rVert (as \lvert \cos\theta \rvert \le 1, The dot product and the angle between vectors), 1 \le R\kappa, so \displaystyle \kappa \ge \frac{1}{R}.
The plane z = 3 cuts the sphere where x^2 + y^2 = 16, the circle \langle 4\cos t, 4\sin t, 3 \rangle of curvature \displaystyle \frac{1}{4} by Theorem 3(d), and \displaystyle \frac{1}{4} \ge \frac{1}{5}. Great circles give equality.
Arc length on a hyperbolic cylinder
The curve \mathbf{r}(t) = \langle \cosh t, \sinh t, t \rangle lies on the cylinder x^2 - y^2 = 1. Find its arc length function with base point (1, 0, 0), reparametrize it by arc length, and write \kappa as a function of s.
SolutionHere \mathbf{r}' = \langle \sinh t, \cosh t, 1 \rangle, and since 1 + \sinh^2 t = \cosh^2 t, \lVert \mathbf{r}' \rVert^2 = 2\cosh^2 t, so \displaystyle \lVert \mathbf{r}' \rVert = \sqrt{2}\cosh t. The base point is t = 0, and
So \displaystyle s = \sqrt{2}\sinh t, \displaystyle \sinh t = \frac{s}{\sqrt{2}} and \displaystyle \cosh t = \sqrt{1 + \frac{s^2}{2}}. Since e^t = \sinh t + \cosh t,
For the curvature it is easier to stay with t. With \mathbf{r}'' = \langle \cosh t, \sinh t, 0 \rangle,
whose length is again \displaystyle \sqrt{2}\cosh t. By Theorem 3(b), \displaystyle \kappa = \frac{1}{2\cosh^2 t}, and since \displaystyle \cosh^2 t = 1 + \frac{s^2}{2},
The curve bends most at its base point and straightens like \displaystyle \frac{1}{s^2} far out.
Boundaries
- Length needs more than continuity. Let \displaystyle \mathbf{r}(t) = \langle t, t\sin\frac{\pi}{t}, 0 \rangle for 0 < t \le 1 and \mathbf{r}(0) = \mathbf{0}. At \displaystyle t_k = \frac{2}{2k + 1} the second component is (-1)^k t_k, so the polygon through t_n < \dots < t_1 is longer than t_1 + \dots + t_{n-1}, unbounded in n. The curve has no finite length; \mathbf{r} is not differentiable at 0.
- The integral measures the path traveled, not the set of points: \langle \cos t, \sin t, 0 \rangle on [0, 4\pi] gives 4\pi, the circle twice. L is the curve’s length when \mathbf{r} is one-to-one on [a, b).
- \mathbf{T} and \kappa need \mathbf{r}' \ne \mathbf{0}. The curve \langle t^2, t^3, 0 \rangle has a cusp at the origin with no tangent direction, and on the cycloid of Exercise 10 the curvature grows without bound near each cusp.
- \mathbf{N} needs \kappa > 0. On y = x^3 the normal points up for x > 0 and down for x < 0, toward the concave side, and is undefined at the inflection point.
Where this goes next
Velocity and acceleration in space writes velocity as \displaystyle \mathbf{v} = \frac{ds}{dt}\mathbf{T} and differentiates: acceleration splits into \displaystyle \frac{d^2 s}{dt^2}\mathbf{T} along the path and \displaystyle \kappa \left(\frac{ds}{dt}\right)^2 \mathbf{N} across it. How fast \mathbf{B} turns, the torsion, belongs to Differential Geometry. Line integrals integrate against ds = \lVert \mathbf{r}'(t) \rVert\,dt, and Theorem 4 is why the answer does not depend on the parametrization.
Exercises
Arc length and arc length parameters
- Find the length of \displaystyle \mathbf{r}(t) = \left\langle 2t, t^2, \frac{t^3}{3} \right\rangle, 0 \le t \le 3.
- Find the length of \displaystyle \mathbf{r}(t) = \langle e^t, e^{-t}, \sqrt{2}\,t \rangle, 0 \le t \le \ln 2.
- Mei orders 26 meters of rail for a taller handrail with the same centerline formula as Andre’s in Example 2, continued past t = 4\pi. Over what interval of t does it run, how high does it climb, and how many full turns does it make?
- Reparametrize the line \mathbf{r}(t) = \langle 1 + 2t, 3 - t, 2t \rangle by arc length from (1, 3, 0) in the direction of increasing t, and find the point at distance 6 from (1, 3, 0) in that direction.
- Show that \displaystyle \mathbf{r}(t) = \left\langle \frac{2}{3}(1 + t)^{3/2}, \frac{2}{3}(1 - t)^{3/2}, t \right\rangle, -1 \le t \le 1, has constant speed, find its length, and reparametrize it by arc length with base point \mathbf{r}(0).
Curvature
- Find \kappa(t) for the curve of Exercise 2, now for all real t, and its largest value.
- Show that the helix \langle a\cos t, a\sin t, bt \rangle with a > 0 and b > 0 has \displaystyle \kappa = \frac{a}{a^2 + b^2}. For a fixed b, which a makes the curvature largest, and what is it?
- Show that y = \ln(\sin x), 0 < x < \pi, has curvature \sin x. Where is the curvature largest?
- Find the point of y = \ln x where the curvature is largest, and that curvature.
- For the cycloid \mathbf{r}(t) = \langle t - \sin t, 1 - \cos t, 0 \rangle, 0 < t < 2\pi, show that \displaystyle \kappa(t) = \frac{1}{4\sin(t/2)}, and find the curvature and the radius of curvature at the top of the arch.
Normals and osculating circles
- Find the center and radius of the osculating circle of y = x^2 at (1, 1).
- For Andre’s handrail of Example 2, find the center of the osculating circle at t = 0, the point (1.2, 0, 0). On which side of the column’s axis is it?
- For \mathbf{r}(t) = \langle t^2, 2t, t^3 \rangle, find \mathbf{T}(0), \mathbf{N}(0), \mathbf{B}(0), \kappa(0) and the osculating circle at the origin.
Proofs
- Let \mathbf{q} be parametrized by arc length and twice differentiable. Prove that \kappa(s) = \lVert \mathbf{q}''(s) \rVert, that \mathbf{q}'(s) \perp \mathbf{q}''(s), and that \displaystyle \mathbf{N}(s) = \frac{\mathbf{q}''(s)}{\lVert \mathbf{q}''(s) \rVert} where \kappa(s) > 0.
- Let \mathbf{r} be smooth and twice differentiable on [a, b], c > 0 a number and \mathbf{p} a fixed vector. Prove that \tilde{\mathbf{r}}(t) = c\,\mathbf{r}(t) + \mathbf{p} has c times the length of \mathbf{r} and curvature \displaystyle \frac{\kappa(t)}{c} at each t.
- Prove that a curve in the xy-plane with constant curvature \kappa_0 > 0 lies on a circle of radius \displaystyle \frac{1}{\kappa_0}. Parametrize by arc length, assume \mathbf{q}'' is continuous, and for \mathbf{w} = \langle w_1, w_2, 0 \rangle let J\mathbf{w} = \langle -w_2, w_1, 0 \rangle; show that the center of the osculating circle does not move.
- Prove that if a smooth, twice differentiable curve lies in the plane \mathbf{n} \cdot (\mathbf{r} - \mathbf{r}_0) = 0, then \displaystyle \mathbf{B} = \pm\frac{\mathbf{n}}{\lVert \mathbf{n} \rVert} at every point where \kappa > 0.
Answers
- 15. \mathbf{r}' = \langle 2, 2t, t^2 \rangle and 4 + 4t^2 + t^4 = (t^2 + 2)^2, so L = \int_0^3 (t^2 + 2)\,dt = 9 + 6.
- \displaystyle \frac{3}{2}. \displaystyle \mathbf{r}' = \langle e^t, -e^{-t}, \sqrt{2} \rangle and e^{2t} + e^{-2t} + 2 = (e^t + e^{-t})^2, so \displaystyle L = \big[e^t - e^{-t}\big]_0^{\ln 2} = 2 - \frac{1}{2}.
- 0 \le t \le 20; it climbs 10 meters and turns \displaystyle \frac{10}{\pi} \approx 3.18 times, so three full turns. The speed is 1.3, so 1.3t = 26 gives t = 20; the height is 0.5 \cdot 20 and the number of turns \displaystyle \frac{20}{2\pi}.
- \displaystyle \mathbf{q}(s) = \left\langle 1 + \frac{2s}{3}, 3 - \frac{s}{3}, \frac{2s}{3} \right\rangle; the point is (5, 1, 4). \lVert \langle 2, -1, 2 \rangle \rVert = 3, so s = 3t; put s = 6.
- Speed \displaystyle \sqrt{3}, length \displaystyle 2\sqrt{3}, and \displaystyle \mathbf{q}(s) = \left\langle \frac{2}{3}\left(1 + \frac{s}{\sqrt{3}}\right)^{3/2}, \frac{2}{3}\left(1 - \frac{s}{\sqrt{3}}\right)^{3/2}, \frac{s}{\sqrt{3}} \right\rangle for \displaystyle -\sqrt{3} \le s \le \sqrt{3}. \mathbf{r}' = \langle (1 + t)^{1/2}, -(1 - t)^{1/2}, 1 \rangle and (1 + t) + (1 - t) + 1 = 3; then \displaystyle s = \sqrt{3}\,t.
- \displaystyle \kappa(t) = \frac{\sqrt{2}}{(e^t + e^{-t})^2}, largest \displaystyle \frac{\sqrt{2}}{4} at t = 0. With \mathbf{r}'' = \langle e^t, e^{-t}, 0 \rangle, \displaystyle \mathbf{r}' \times \mathbf{r}'' = \langle -\sqrt{2}\,e^{-t}, \sqrt{2}\,e^t, 2 \rangle, of length \displaystyle \sqrt{2}\,(e^t + e^{-t}), and \lVert \mathbf{r}' \rVert = e^t + e^{-t} \ge 2, with equality only at t = 0.
- a = b, with \displaystyle \kappa = \frac{1}{2b}. Here \mathbf{r}' \times \mathbf{r}'' = \langle ab\sin t, -ab\cos t, a^2 \rangle, of length \displaystyle a\sqrt{a^2 + b^2}, and \displaystyle \lVert \mathbf{r}' \rVert = \sqrt{a^2 + b^2}. Then \displaystyle \frac{d}{da}\frac{a}{a^2 + b^2} = \frac{b^2 - a^2}{(a^2 + b^2)^2}, positive for a < b and negative for a > b.
- Largest, 1, at \displaystyle \left(\frac{\pi}{2}, 0\right). f' = \cot x, f'' = -\csc^2 x and 1 + \cot^2 x = \csc^2 x, so \displaystyle \kappa = \frac{\csc^2 x}{\csc^3 x} = \sin x, as \csc x > 0 on (0, \pi).
- At \displaystyle \left(\frac{\sqrt{2}}{2}, -\frac{\ln 2}{2}\right), with \displaystyle \kappa = \frac{2\sqrt{3}}{9} \approx 0.385. By Theorem 3(c), \displaystyle \kappa(x) = \frac{x}{(1 + x^2)^{3/2}}, whose derivative \displaystyle \frac{1 - 2x^2}{(1 + x^2)^{5/2}} is positive before \displaystyle x = \frac{1}{\sqrt{2}} and negative after.
- At the top, (\pi, 2): \displaystyle \kappa = \frac{1}{4}, radius 4. \mathbf{r}' = \langle 1 - \cos t, \sin t, 0 \rangle, \mathbf{r}'' = \langle \sin t, \cos t, 0 \rangle, and \mathbf{r}' \times \mathbf{r}'' has third component \cos t - 1. With \displaystyle 1 - \cos t = 2\sin^2\frac{t}{2}, \displaystyle \lVert \mathbf{r}' \rVert = 2\sin\frac{t}{2} and \displaystyle \kappa = \frac{2\sin^2(t/2)}{8\sin^3(t/2)}.
- Center \displaystyle \left(-4, \frac{7}{2}\right), radius \displaystyle \frac{5\sqrt{5}}{2} \approx 5.59. At x = 1, f' = f'' = 2, so \displaystyle \kappa = \frac{2}{5^{3/2}}. \mathbf{T}(x) = (1 + 4x^2)^{-1/2}\langle 1, 2x \rangle has \mathbf{T}'(1) = 5^{-3/2}\langle -4, 2 \rangle, so \displaystyle \mathbf{N} = \frac{1}{\sqrt{5}}\langle -2, 1 \rangle; add \displaystyle \frac{5\sqrt{5}}{2}\mathbf{N} = \left\langle -5, \frac{5}{2} \right\rangle to (1, 1).
- \displaystyle \left(-\frac{5}{24}, 0, 0\right), on the far side of the axis, \displaystyle \frac{5}{24} \approx 0.21 meters past it. At t = 0, \mathbf{N} = \langle -1, 0, 0 \rangle and the radius is \displaystyle \frac{169}{120}; \displaystyle \frac{6}{5} - \frac{169}{120} = -\frac{25}{120}.
- \mathbf{T}(0) = \mathbf{j}, \mathbf{N}(0) = \mathbf{i}, \mathbf{B}(0) = -\mathbf{k}, \displaystyle \kappa(0) = \frac{1}{2}; the circle has center (2, 0, 0) and radius 2 in the plane z = 0. \mathbf{r}'(0) = \langle 0, 2, 0 \rangle, \mathbf{r}''(0) = \langle 2, 0, 0 \rangle, cross product \langle 0, 0, -4 \rangle, so \displaystyle \kappa(0) = \frac{4}{8}. The speed \displaystyle \sqrt{4 + 4t^2 + 9t^4} has derivative 0 at t = 0, so \displaystyle \mathbf{T}'(0) = \frac{1}{2}\mathbf{r}''(0) = \mathbf{i}, and \mathbf{B} = \mathbf{j} \times \mathbf{i}.
- Since \lVert \mathbf{q}' \rVert = 1, arc length differs from s by a constant, so \displaystyle \frac{d}{ds} is differentiation in the parameter and \mathbf{T} = \mathbf{q}'. Hence \kappa = \lVert \mathbf{T}' \rVert = \lVert \mathbf{q}'' \rVert. As \mathbf{q}' \cdot \mathbf{q}' = 1 is constant, Theorem 3 of Vector-valued functions gives \mathbf{q}' \cdot \mathbf{q}'' = 0. Where \kappa > 0, \displaystyle \mathbf{N} = \frac{\mathbf{T}'}{\lVert \mathbf{T}' \rVert} = \frac{\mathbf{q}''}{\lVert \mathbf{q}'' \rVert}.
- \tilde{\mathbf{r}}' = c\,\mathbf{r}', continuous and never \mathbf{0}, and \tilde{\mathbf{r}}'' = c\,\mathbf{r}''. The length is \int_a^b c\,\lVert \mathbf{r}' \rVert\,dt = cL. In Theorem 3(b) the numerator \lVert c\,\mathbf{r}' \times c\,\mathbf{r}'' \rVert is c^2 times the old one and the denominator \lVert c\,\mathbf{r}' \rVert^3 is c^3 times the old one, so \displaystyle \tilde{\kappa} = \frac{\kappa}{c}.
- Let \mathbf{q}(s) be the arc length parametrization, so \mathbf{T} = \mathbf{q}' and \mathbf{T}' = \kappa_0\mathbf{N} with \displaystyle ' = \frac{d}{ds} (Exercise 14); every vector here has third component 0. J is linear, J\mathbf{w} \perp \mathbf{w}, \lVert J\mathbf{w} \rVert = \lVert \mathbf{w} \rVert and J(J\mathbf{w}) = -\mathbf{w}. The unit vectors of the xy-plane perpendicular to \mathbf{T} are \pm J\mathbf{T}, so \mathbf{N} = \varepsilon J\mathbf{T} with \varepsilon = \mathbf{N} \cdot J\mathbf{T} \in \{1, -1\}. As \mathbf{q}'' is continuous, so are \displaystyle \mathbf{N} = \frac{\mathbf{q}''}{\kappa_0} and \varepsilon, and a continuous function with values \pm 1 on an interval is constant (intermediate value theorem). Let \displaystyle \mathbf{c} = \mathbf{q} + \frac{1}{\kappa_0}\mathbf{N} = \mathbf{q} + \frac{\varepsilon}{\kappa_0}J\mathbf{T}. By linearity, (J\mathbf{T})' = J\mathbf{T}' = \kappa_0\varepsilon\,J(J\mathbf{T}) = -\kappa_0\varepsilon\,\mathbf{T}, so \mathbf{c}' = \mathbf{T} - \varepsilon^2\mathbf{T} = \mathbf{0}, and \mathbf{c} is a constant point (Exercise 16 of Vector-valued functions). Then \displaystyle \lVert \mathbf{q}(s) - \mathbf{c} \rVert = \frac{1}{\kappa_0}\lVert \mathbf{N} \rVert = \frac{1}{\kappa_0} for every s: the curve lies on the circle with center \mathbf{c} and radius \displaystyle \frac{1}{\kappa_0}.
- Differentiating \mathbf{n} \cdot (\mathbf{r}(t) - \mathbf{r}_0) = 0, with \mathbf{n} constant, gives \mathbf{n} \cdot \mathbf{r}' = 0, so \mathbf{n} \cdot \mathbf{T} = 0 for every t. Differentiating again, \mathbf{n} \cdot \mathbf{T}' = 0, so \mathbf{n} \cdot \mathbf{N} = 0 where \kappa > 0. Mutually perpendicular unit vectors are linearly independent, so \mathbf{T}, \mathbf{N}, \mathbf{B} form a basis of \mathbb{R}^3. Writing \mathbf{n} = \alpha\mathbf{T} + \beta\mathbf{N} + \gamma\mathbf{B} and dotting with each basis vector gives \alpha = \mathbf{n} \cdot \mathbf{T} = 0, \beta = \mathbf{n} \cdot \mathbf{N} = 0 and \gamma = \mathbf{n} \cdot \mathbf{B}. So \mathbf{n} = \gamma\mathbf{B}, \lvert \gamma \rvert = \lVert \mathbf{n} \rVert, and \displaystyle \mathbf{B} = \pm\frac{\mathbf{n}}{\lVert \mathbf{n} \rVert}.