Line integrals
A force pushes on an object moving along a curved path, and the force changes from point to point. How much work does it do, and how do we add up any quantity spread along a curve, such as the mass of a bent bar whose thickness varies?
Where you are 8 in Vector calculus
Why this exists
Work as an integral found the work of a force that varies along a straight line, \int_a^b F(x)\,dx, and Arc length and curvature measured a curve by integrating its speed \lVert \mathbf{r}'(t) \rVert. Many problems need both at once. A force field (Vector fields) acts on an object moving along a curve, so the force and the direction of motion both change; a bar bent into a curve has a density that changes along it. The line integral adds up such a quantity along a curve. It is the first integral of vector calculus, and the theorems of Green, Stokes and Gauss each equate one to an integral over a region.
Definition
Curves are given by vector functions \mathbf{r} : [a, b] \to \mathbb{R}^n with n = 2 or 3 (Vector-valued functions). The parametrization \mathbf{r} is smooth if \mathbf{r}' is continuous on [a, b] (one-sided at the ends) and \mathbf{r}'(t) \ne \mathbf{0} for every t. It is piecewise smooth if \mathbf{r} is continuous and there are a = t_0 < t_1 < \dots < t_k = b with \mathbf{r} smooth on each [t_{i-1}, t_i].
The curve C traced by \mathbf{r} is oriented from its initial point \mathbf{r}(a) to its terminal point \mathbf{r}(b), and closed if the two coincide. The reversed curve -C is traced by \mathbf{q}(t) = \mathbf{r}(a + b - t), a \le t \le b. If C_1 ends where C_2 begins, C_1 + C_2 is C_1 followed by C_2.
Let C be traced by a smooth \mathbf{r}(t) = \langle x(t), y(t), z(t) \rangle, a \le t \le b, let f be a scalar function continuous on C, and let \mathbf{F} = \langle P, Q, R \rangle be a vector field continuous on C.
The line integral of f with respect to arc length is
The line integral of \mathbf{F} along C is
The line integrals of f with respect to x, y and z are \int_C f\,dx = \int_a^b f(\mathbf{r}(t))\,x'(t)\,dt and its two analogues. Expanding the dot product,
The integrands are continuous on [a, b], so every one of these integrals exists. Over a piecewise smooth curve, each integral is the sum of the integrals over its smooth pieces. Around a closed curve we write \oint_C. In the plane, drop z and R. The definitions use one parametrization, and Result 1 shows that tracing C at another pace in the same direction gives the same values.
When \mathbf{F} is a force, \int_C \mathbf{F} \cdot d\mathbf{r} is the work it does on an object moving along C. When \delta is the density, in mass per unit length, of a thin wire along C, the wire has mass m = \int_C \delta\,ds and center of mass (\bar{x}, \bar{y}, \bar{z}) with \displaystyle \bar{x} = \frac{1}{m}\int_C x\,\delta\,ds, and likewise for \bar{y} and \bar{z}. With f = 1, \int_C ds = L, the length of C.
Intuition
Cut [a, b] at a = t_0 < t_1 < \dots < t_N = b. The piece of C from \mathbf{r}(t_{i-1}) to \mathbf{r}(t_i) has length \Delta s_i \approx \lVert \mathbf{r}'(t_i) \rVert\,\Delta t_i and displacement \Delta \mathbf{r}_i \approx \mathbf{r}'(t_i)\,\Delta t_i. On a short piece f and \mathbf{F} are nearly constant, so the piece adds about f(\mathbf{r}(t_i))\,\Delta s_i to \int_C f\,ds, and the force does work about \mathbf{F}(\mathbf{r}(t_i)) \cdot \Delta \mathbf{r}_i, force times displacement in the sense of the dot product. The sums of these are Riemann sums for the two integrals of the definition.
The dot product keeps only the part of the force along the motion. A force across the path does no work, a force with the motion does positive work, a force against it negative work. Turning around reverses every \Delta \mathbf{r}_i, so work changes sign, while the lengths \Delta s_i do not depend on direction. And work depends on the whole path, not only its ends: Figure 1 shows one field doing three different amounts of work along three paths between the same two points.
Results
Throughout, f and \mathbf{F} are continuous on the curves named.
Result 1 (change of parametrization). Let C be traced by a smooth \mathbf{r} : [a, b] \to \mathbb{R}^n, let h : [c, d] \to [a, b] be onto, with h' continuous and never zero on [c, d], and let \mathbf{q} = \mathbf{r} \circ h. Then \mathbf{q} is smooth, and:
(a) \int f\,ds computed with \mathbf{q} equals \int_C f\,ds;
(b) \int \mathbf{F} \cdot d\mathbf{r} computed with \mathbf{q} equals \int_C \mathbf{F} \cdot d\mathbf{r} if h' > 0, and equals -\int_C \mathbf{F} \cdot d\mathbf{r} if h' < 0. In particular
Result 2 (tangential form). If C is traced by a smooth \mathbf{r} with unit tangent \mathbf{T} = \mathbf{r}'/\lVert \mathbf{r}' \rVert, then \int_C \mathbf{F} \cdot d\mathbf{r} = \int_C (\mathbf{F} \cdot \mathbf{T})\,ds.
Result 3 (linearity and additivity). For numbers \alpha, \beta and a piecewise smooth C, \int_C (\alpha\mathbf{F} + \beta\mathbf{G}) \cdot d\mathbf{r} = \alpha\int_C \mathbf{F} \cdot d\mathbf{r} + \beta\int_C \mathbf{G} \cdot d\mathbf{r}. If C_1 ends where C_2 begins, \int_{C_1 + C_2} \mathbf{F} \cdot d\mathbf{r} = \int_{C_1} \mathbf{F} \cdot d\mathbf{r} + \int_{C_2} \mathbf{F} \cdot d\mathbf{r}. Both statements hold for \int f\,ds as well.
Result 4 (the length estimate). If a piecewise smooth C has length L and \lVert \mathbf{F} \rVert \le M on C, then \left\lvert \int_C \mathbf{F} \cdot d\mathbf{r} \right\rvert \le ML. If \lvert f \rvert \le M on C, then \left\lvert \int_C f\,ds \right\rvert \le ML.
Result 5 (work and kinetic energy). Let an object of mass m move along \mathbf{r} : [a, b] \to \mathbb{R}^3 with \mathbf{r}'' continuous, so that the total force on it at time t is \mathbf{F}(t) = m\,\mathbf{r}''(t) (Newton’s second law, as in Velocity and acceleration in space). Then
When the force is a field, \mathbf{F}(t) = \mathbf{F}(\mathbf{r}(t)), and \mathbf{r} is smooth, the left side is \int_C \mathbf{F} \cdot d\mathbf{r}: the work done equals the change in kinetic energy.
Why it is true
Result 1. By the chain rule for vector functions (Theorem 2(e) of Vector-valued functions), \mathbf{q}'(t) = h'(t)\,\mathbf{r}'(h(t)), continuous and never \mathbf{0}, so \mathbf{q} is smooth. Since h' is continuous and never zero, it has one sign by the intermediate value theorem. If h' > 0, h is increasing and onto, so h(c) = a and h(d) = b; if h' < 0, then h(c) = b and h(d) = a.
(a) Let g(u) = f(\mathbf{r}(u))\,\lVert \mathbf{r}'(u) \rVert, continuous on [a, b]. The integral with \mathbf{q} is \int_c^d g(h(t))\,\lvert h'(t) \rvert\,dt. Substituting u = h(t) (u-substitution), if h' > 0 it is \int_a^b g(u)\,du; if h' < 0 it is -\int_c^d g(h(t))\,h'(t)\,dt = -\int_b^a g(u)\,du = \int_a^b g(u)\,du.
(b) Let G(u) = \mathbf{F}(\mathbf{r}(u)) \cdot \mathbf{r}'(u). Then \mathbf{F}(\mathbf{q}(t)) \cdot \mathbf{q}'(t) = G(h(t))\,h'(t), and the same substitution gives \int_{h(c)}^{h(d)} G(u)\,du, which is \int_a^b G if h' > 0 and \int_b^a G = -\int_a^b G if h' < 0. The reversed curve is the case h(t) = a + b - t, with h' = -1.
Result 2. For each t, \big(\mathbf{F}(\mathbf{r}(t)) \cdot \mathbf{T}(t)\big)\lVert \mathbf{r}'(t) \rVert = \mathbf{F}(\mathbf{r}(t)) \cdot \mathbf{r}'(t), so the two integrals have the same integrand on [a, b].
Result 3. The integrand \mathbf{F}(\mathbf{r}(t)) \cdot \mathbf{r}'(t) is linear in \mathbf{F}, and the integral over each piece is linear. For additivity, trace C_1 + C_2 by a parametrization of C_1 followed by one of C_2 with its parameter shifted to start where the first ends. Its smooth pieces are those of C_1 and those of C_2, and by Result 1 with h(t) = t + \text{constant} the shift changes no piece’s integral. The same argument works for f\,ds.
Result 4. For vectors, \lvert \mathbf{u} \cdot \mathbf{v} \rvert = \lVert \mathbf{u} \rVert \lVert \mathbf{v} \rVert \lvert \cos\theta \rvert \le \lVert \mathbf{u} \rVert \lVert \mathbf{v} \rVert (The dot product and the angle between vectors). So on each smooth piece \lvert \mathbf{F}(\mathbf{r}(t)) \cdot \mathbf{r}'(t) \rvert \le M\lVert \mathbf{r}'(t) \rVert, and
which is M times the length of the piece. Adding over the pieces and using the triangle inequality gives ML. For f, use \lvert f(\mathbf{r}(t)) \rvert\,\lVert \mathbf{r}'(t) \rVert \le M\lVert \mathbf{r}'(t) \rVert.
Result 5. Let \displaystyle k(t) = \frac12 m\,\mathbf{r}'(t) \cdot \mathbf{r}'(t). By the dot product rule of Vector-valued functions, k'(t) = m\,\mathbf{r}''(t) \cdot \mathbf{r}'(t) = \mathbf{F}(t) \cdot \mathbf{r}'(t), which is continuous. By the fundamental theorem of calculus (The second fundamental theorem of calculus), the integral is k(b) - k(a).
Worked examples
A segment traced both ways
Let C be the segment from (1, 0, 2) to (3, 2, 3). Find \int_C xz\,ds and \int_C xz\,dx, and the same two integrals over -C.
SolutionParametrize by \mathbf{r}(t) = \langle 1 + 2t, 2t, 2 + t \rangle, 0 \le t \le 1 (Lines and planes in space). Then \mathbf{r}'(t) = \langle 2, 2, 1 \rangle, so \lVert \mathbf{r}' \rVert = 3 and x'(t) = 2. On C, xz = (1 + 2t)(2 + t) = 2 + 5t + 2t^2. Hence
and \displaystyle \int_C xz\,dx = 2 \cdot \frac{31}{6} = \frac{31}{3}. By Result 1, over -C the first stays \displaystyle \frac{31}{2} and the second becomes \displaystyle -\frac{31}{3}. Directly: \mathbf{q}(t) = \mathbf{r}(1 - t) has the same speed 3 but x'(t) = -2, and the substitution u = 1 - t turns its integrals into the ones above with the factor 2 replaced by -2. Arc length ignores direction; dx does not.
An arch at an ironworks
At an ironworks, Amara bends a bar into a semicircular arch for a garden gate, \mathbf{r}(t) = \langle 2\cos t, 2\sin t \rangle, 0 \le t \le \pi, in meters, with the x-axis along the ground. Kofi rolls the bar thicker toward the top, so that its density is \delta(x, y) = 3 + y kilograms per meter. Find the mass of the arch and its center of mass.
SolutionHere \lVert \mathbf{r}'(t) \rVert = \lVert \langle -2\sin t, 2\cos t \rangle \rVert = 2. The mass is
kilograms. The arch and its density are symmetric across the y-axis, and indeed \int_C x\,\delta\,ds = \int_0^\pi 4\cos t\,(3 + 2\sin t)\,dt, which is 4\left[3\sin t + \sin^2 t\right]_0^\pi = 0, so \bar{x} = 0. Using \displaystyle \int_0^\pi \sin^2 t\,dt = \frac{\pi}{2},
so, in meters,
The center of mass (0, 1.36) lies in the open space under the arch, not on the bar (Figure 2). A bar of constant density would have \displaystyle \bar{y} = \frac{1}{2\pi}\int_0^\pi 4\sin t\,dt = \frac{4}{\pi} \approx 1.27; the heavier top raises the center by about 9 centimeters.
One field, three paths
Let \mathbf{F}(x, y) = \langle y^2, x \rangle. Find \int_C y^2\,dx + x\,dy from (0, 0) to (1, 1) along (a) the segment C_1; (b) the parabola y = x^2, called C_2; (c) the path C_3 along the x-axis to (1, 0) and then straight up to (1, 1). (d) Find the integral around the closed curve C_2 - C_1, meaning C_2 + (-C_1).
Solution(a) With \mathbf{r}(t) = \langle t, t \rangle, 0 \le t \le 1, we have x' = y' = 1, and the integral is \displaystyle \int_0^1 (t^2 + t)\,dt = \frac56.
(b) With \mathbf{r}(t) = \langle t, t^2 \rangle, x' = 1 and y' = 2t, so the integral is \displaystyle \int_0^1 (t^4 + 2t^2)\,dt = \frac15 + \frac23 = \frac{13}{15}.
(c) On the first piece, \langle t, 0 \rangle, both y^2 and y' are 0, so the integrand is 0. On the second, \langle 1, t \rangle, x' = 0 and y' = 1, so the integrand is x = 1 and the integral is 1. By Result 3 the total is 0 + 1 = 1.
(d) By Results 3 and 1, \displaystyle \frac{13}{15} - \frac56 = \frac{1}{30}.
The three paths give three amounts of work (Figure 1), and the loop gives a nonzero circulation. Conservative fields and potential functions shows that for a gradient field all three would agree and every loop would give 0; so this \mathbf{F} is not a gradient field on any open set containing the paths.
A twisted cubic in space
Evaluate \int_C z\,dx + x\,dy + y\,dz along the twisted cubic \mathbf{r}(t) = \langle t, t^2, t^3 \rangle, 0 \le t \le 1, and along the segment from (0, 0, 0) to (1, 1, 1).
SolutionOn the cubic, x' = 1, y' = 2t, z' = 3t^2, and the curve is smooth since x' \ne 0. Substituting,
On the segment \langle t, t, t \rangle every derivative is 1 and the integrand is t + t + t, giving \displaystyle \frac32 = \frac{90}{60}. The endpoints are the same, the values differ by \displaystyle \frac{1}{60}, so this field in space also does path-dependent work.
Circulation from the tangential form
Let \mathbf{F}(x, y) = \langle 1 - y, x \rangle and let C be the circle of radius 3 about the origin, counterclockwise. Find \oint_C \mathbf{F} \cdot d\mathbf{r} with Result 2, check it by parametrizing, and give the clockwise value.
SolutionCounterclockwise, the unit tangent at (x, y) on C is \displaystyle \mathbf{T} = \frac13\langle -y, x \rangle: it has length 1, is perpendicular to the radius, and turns the counterclockwise way. Using x^2 + y^2 = 9 on C,
So \displaystyle \oint_C \mathbf{F} \cdot d\mathbf{r} = 3 \cdot 6\pi - \frac13\oint_C y\,ds, and with \mathbf{r}(t) = \langle 3\cos t, 3\sin t \rangle, \oint_C y\,ds = \int_0^{2\pi} 9\sin t\,dt = 0. The circulation is 18\pi. Check: \mathbf{F}(\mathbf{r}(t)) \cdot \mathbf{r}'(t) is (1 - 3\sin t)(-3\sin t) + 9\cos^2 t = 9 - 3\sin t, whose integral over [0, 2\pi] is 18\pi. Clockwise, by Result 1, it is -18\pi. The constant part \langle 1, 0 \rangle of \mathbf{F} adds nothing: it does positive work on the lower half of the circle and the same negative work on the upper half.
A proof: small circles carry small circulation
Let \mathbf{F} be continuous on an open set D \subseteq \mathbb{R}^2 and \mathbf{p} \in D. For \varepsilon > 0 so small that the closed disk of radius \varepsilon about \mathbf{p} lies in D, let C_\varepsilon be its boundary circle, counterclockwise. Prove: (a) \oint_C \mathbf{c} \cdot d\mathbf{r} = 0 for every constant vector \mathbf{c} and every closed piecewise smooth C; (b) \left\lvert \oint_{C_\varepsilon} \mathbf{F} \cdot d\mathbf{r} \right\rvert \le 2\pi\varepsilon M_\varepsilon, where M_\varepsilon is the largest value of \lVert \mathbf{F} - \mathbf{F}(\mathbf{p}) \rVert on C_\varepsilon; (c) \displaystyle \frac{1}{\varepsilon}\oint_{C_\varepsilon} \mathbf{F} \cdot d\mathbf{r} \to 0 as \varepsilon \to 0^+.
Solution(a) Let C be traced by \mathbf{r} on [a, b], smooth on each [t_{i-1}, t_i]. There \mathbf{c} \cdot \mathbf{r}'(t) is the derivative of \mathbf{c} \cdot \mathbf{r}(t), so by the fundamental theorem of calculus the piece contributes \mathbf{c} \cdot \mathbf{r}(t_i) - \mathbf{c} \cdot \mathbf{r}(t_{i-1}). The sum telescopes to \mathbf{c} \cdot (\mathbf{r}(b) - \mathbf{r}(a)), which is 0 since C is closed.
(b) By Result 3,
and the last integral is 0 by (a).
With \mathbf{r}(t) = \mathbf{p} + \varepsilon\langle \cos t, \sin t \rangle, the function t \mapsto \lVert \mathbf{F}(\mathbf{r}(t)) - \mathbf{F}(\mathbf{p}) \rVert is continuous on [0, 2\pi], so it has a largest value M_\varepsilon (The extreme value theorem). The circle has length 2\pi\varepsilon, and Result 4 gives the bound.
(c) Let \eta > 0. By continuity of \mathbf{F} at \mathbf{p} there is \delta > 0 with \lVert \mathbf{F}(\mathbf{x}) - \mathbf{F}(\mathbf{p}) \rVert < \eta whenever \lVert \mathbf{x} - \mathbf{p} \rVert < \delta. For \varepsilon < \delta every point of C_\varepsilon is at distance \varepsilon from \mathbf{p}, so M_\varepsilon < \eta and, by (b), \displaystyle \left\lvert \frac{1}{\varepsilon}\oint_{C_\varepsilon} \mathbf{F} \cdot d\mathbf{r} \right\rvert \le 2\pi M_\varepsilon, which is less than 2\pi\eta. Since \eta was arbitrary, the limit is 0.
Boundaries
The value depends on how a set is traced, not only on the set. Result 1 covers reparametrizations by a one-to-one h with h' \ne 0. Tracing the circle of Example 5 twice, \langle 3\cos t, 3\sin t \rangle on [0, 4\pi], doubles both its length and its circulation, to 36\pi. Going out along a curve and back along it gives work 0 (Exercise 12).
Work depends on the path (Examples 3 and 4). The fields for which it does not are the subject of Conservative fields and potential functions.
The curve needs finite length. The definitions need a piecewise smooth parametrization. The graph of y = x\sin(1/x) for 0 < x \le 1, joined to the origin, is a continuous curve of infinite length, and \int_C ds means nothing for it.
Arc length ignores orientation; work does not. \int_{-C} f\,ds = \int_C f\,ds, but \int_{-C} f\,dx = -\int_C f\,dx (Example 1).
Where this goes next
Conservative fields and potential functions proves the fundamental theorem for line integrals: when \mathbf{F} = \nabla f, \int_C \mathbf{F} \cdot d\mathbf{r} is f at the end minus f at the start, the situation Example 3 rules out for \langle y^2, x \rangle. Green's theorem turns the circulation around a closed plane curve into a double integral over the region inside; dividing the circulation of Example 6 by the area \pi\varepsilon^2 instead of \varepsilon leads to its scalar curl. Parametric surfaces and surface integrals do for surfaces what ds does for curves, and Contour integrals integrate complex functions along paths with the same parametrize-and-integrate formula.
Exercises
Integrals with respect to arc length
- Find \int_C (x + y)\,ds, where C is the segment from (0, 0) to (3, 4).
- Find \int_C xy\,ds, where C is the quarter of the circle x^2 + y^2 = 4 in the first quadrant.
- Find \int_C z\,ds, where C is the conical spiral \mathbf{r}(t) = \langle e^t\cos t, e^t\sin t, e^t \rangle, 0 \le t \le 1.
- A wire lies along y = x^2, 0 \le x \le 2, with density \delta(x, y) = x. Find its mass.
- Let C be the upper half of the unit circle from (1, 0) to (-1, 0). Find \int_C y\,ds and \int_C y\,dx, and both integrals over -C.
Work and circulation
- Find \int_C \mathbf{F} \cdot d\mathbf{r} for \mathbf{F}(x, y) = \langle 2y, x^2 \rangle along the segment from (1, 0) to (2, 3).
- Find \oint_C y\,dx - x\,dy, where C is the circle of radius 2 about the origin, counterclockwise.
- Find \int_C y\,dx + z\,dy + x\,dz along the helix \langle \cos t, \sin t, t \rangle, 0 \le t \le 2\pi.
- Find \int_C xy\,dx + (x + z)\,dy + z^2\,dz along the segment from (0, 0, 0) to (1, 2, 2).
- Find \oint_C \mathbf{F} \cdot d\mathbf{r} for \mathbf{F}(x, y) = \langle xy, x \rangle around the triangle with vertices (0, 0), (2, 0), (0, 2), counterclockwise, and then clockwise.
- Without parametrizing, find \oint_C \mathbf{F} \cdot d\mathbf{r} for \mathbf{F}(x, y) = \langle x - 2y, 2x + y \rangle around the circle of radius 3 about the origin, counterclockwise.
Parametrizations, estimates and energy
- Let \mathbf{F}(x, y) = \langle y, x \rangle and let C be the arc of y = x^2 from (0, 0) to (1, 1). (a) Find \int_C \mathbf{F} \cdot d\mathbf{r} with \langle u, u^2 \rangle, 0 \le u \le 1. (b) Find it with \langle \tan t, \tan^2 t \rangle, \displaystyle 0 \le t \le \frac{\pi}{4}, and explain the agreement. (c) Evaluate \int_0^{\pi} \mathbf{F}(\mathbf{q}(t)) \cdot \mathbf{q}'(t)\,dt for \mathbf{q}(t) = \langle \sin t, \sin^2 t \rangle, which also lands on that arc, and explain the value.
- Let C be the segment from (0, 0) to (3, 4) and \displaystyle \mathbf{F}(x, y) = \left\langle e^{-x^2}, \frac{1}{1 + y^2} \right\rangle. Use Result 4 to show \displaystyle \left\lvert \int_C \mathbf{F} \cdot d\mathbf{r} \right\rvert \le 5\sqrt2, then find the integral to three decimal places.
- An object of mass 3 kilograms moves along \mathbf{r}(t) = \langle 2t, t^2 \rangle meters for 0 \le t \le 2 seconds. Find the work done by the total force, from the definition and from Result 5.
Proofs
- Let g be continuous on (0, \infty), let \mathbf{F}(\mathbf{r}) = g(\lVert \mathbf{r} \rVert)\,\mathbf{r} on \mathbb{R}^3 without the origin, and let C be a piecewise smooth curve on the sphere \lVert \mathbf{r} \rVert = a, a > 0. Prove that \int_C \mathbf{F} \cdot d\mathbf{r} = 0.
- Let C be traced by a smooth \mathbf{r}, of length L > 0, and let f be continuous on C. Prove that some point \mathbf{P} of C has \int_C f\,ds = f(\mathbf{P})\,L.
- Let p and q be continuous on \mathbb{R} and \mathbf{F}(x, y) = \langle p(x), q(y) \rangle. Prove that \int_C \mathbf{F} \cdot d\mathbf{r} is the same for every piecewise smooth C from a point A to a point B.
- Refute with a counterexample: if \oint_C \mathbf{F} \cdot d\mathbf{r} = 0 for a closed curve C, then \mathbf{F} \cdot \mathbf{T} = 0 at every point of C.
Answers
- \displaystyle \frac{35}{2}. With \mathbf{r}(t) = \langle 3t, 4t \rangle, \lVert \mathbf{r}' \rVert = 5 and x + y = 7t, so the integral is \int_0^1 35t\,dt.
- 4. With \langle 2\cos t, 2\sin t \rangle, \displaystyle 0 \le t \le \frac{\pi}{2}, the speed is 2 and the integral is \int_0^{\pi/2} 8\sin t\cos t\,dt = 4\left[\sin^2 t\right]_0^{\pi/2}.
- \displaystyle \frac{\sqrt3}{2}(e^2 - 1) \approx 5.53. \lVert \mathbf{r}' \rVert^2 is e^{2t} times (\cos t - \sin t)^2 + (\sin t + \cos t)^2 + 1 = 3, so \lVert \mathbf{r}' \rVert^2 = 3e^{2t} and the integral is \displaystyle \int_0^1 \sqrt3\,e^{2t}\,dt.
- \displaystyle \frac{17\sqrt{17} - 1}{12} \approx 5.76. With \langle t, t^2 \rangle the speed is \displaystyle \sqrt{1 + 4t^2}, and \displaystyle \int_0^2 t\sqrt{1 + 4t^2}\,dt = \left[\frac{1}{12}(1 + 4t^2)^{3/2}\right]_0^2.
- \int_C y\,ds = 2 and \displaystyle \int_C y\,dx = -\frac{\pi}{2}; over -C they are 2 and \displaystyle \frac{\pi}{2}. With \langle \cos t, \sin t \rangle, 0 \le t \le \pi: \int_0^\pi \sin t\,dt = 2 and \displaystyle \int_0^\pi \sin t\,(-\sin t)\,dt = -\frac{\pi}{2}; then Result 1.
- 10. With \langle 1 + t, 3t \rangle, the integrand is 2 \cdot 3t + (1 + t)^2 \cdot 3, and \int_0^1 \left(6t + 3(1 + t)^2\right)dt = 3 + 7.
- -8\pi. With \langle 2\cos t, 2\sin t \rangle, y\,x' - x\,y' = -4\sin^2 t - 4\cos^2 t = -4 for 0 \le t \le 2\pi.
- -\pi. The integrand is -\sin^2 t + t\cos t + \cos t; over [0, 2\pi] the first term gives -\pi, the second \left[t\sin t + \cos t\right]_0^{2\pi} = 0 and the third 0.
- \displaystyle \frac{19}{3}. With \langle t, 2t, 2t \rangle the integrand is 2t^2 + 3t \cdot 2 + 4t^2 \cdot 2 = 10t^2 + 6t.
- \displaystyle \frac23 counterclockwise, \displaystyle -\frac23 clockwise. On the bottom edge y = 0 and y' = 0; on the left edge x = 0 makes \mathbf{F} = \mathbf{0}. On the hypotenuse \langle 2 - 2t, 2t \rangle the integrand is -4t(2 - 2t) + 2(2 - 2t) = 8t^2 - 12t + 4, with integral \displaystyle \frac83 - 6 + 4.
- 36\pi. With \displaystyle \mathbf{T} = \frac13\langle -y, x \rangle, \displaystyle \mathbf{F} \cdot \mathbf{T} = \frac{2(x^2 + y^2)}{3} = 6 on C, so by Result 2 the integral is 6 times the length 6\pi.
- (a) 1: the integrand is u^2 + u \cdot 2u = 3u^2. (b) 1: the integrand is 3\tan^2 t\sec^2 t, with antiderivative \tan^3 t; Result 1 applies with h(t) = \tan t, h' = \sec^2 t > 0. (c) 0: the integrand is 3\sin^2 t\cos t, with antiderivative \sin^3 t. \mathbf{q} runs along the arc to (1, 1) for \displaystyle t \le \frac{\pi}{2} and back, so it traces C and then -C, giving 1 - 1. Result 1 does not apply: \mathbf{q} = \mathbf{r} \circ h with h(t) = \sin t on [0, \pi], and \displaystyle h'(\frac{\pi}{2}) = 0, so h turns back instead of being one-to-one.
- 2.212. \lVert \mathbf{F} \rVert^2 \le 1 + 1 and L = 5, giving the bound \displaystyle 5\sqrt2 \approx 7.07. With \langle 3t, 4t \rangle the integral is \displaystyle \int_0^1 \left(3e^{-9t^2} + \frac{4}{1 + 16t^2}\right)dt, which equals \int_0^3 e^{-u^2}\,du + \arctan 4, about 0.886 + 1.326.
- 24 joules. The force is 3\mathbf{r}'' = \langle 0, 6 \rangle, and \int_0^2 \langle 0, 6 \rangle \cdot \langle 2, 2t \rangle\,dt = \int_0^2 12t\,dt = 24. By Result 5, with speeds squared \lVert \langle 2, 4 \rangle \rVert^2 = 20 and \lVert \langle 2, 0 \rangle \rVert^2 = 4, the work is \displaystyle \frac32(20 - 4) = 24.
- On a smooth piece traced by \mathbf{r}, \mathbf{r}(t) \cdot \mathbf{r}(t) = a^2 for all t, so by the dot product rule 2\,\mathbf{r}(t) \cdot \mathbf{r}'(t) = 0. Then \mathbf{F}(\mathbf{r}(t)) \cdot \mathbf{r}'(t) = g(a)\,\mathbf{r}(t) \cdot \mathbf{r}'(t) = 0, every piece contributes 0, and so does the sum.
- Let \phi(t) = f(\mathbf{r}(t)), continuous on [a, b], with least value m and greatest value M (The extreme value theorem). Since \lVert \mathbf{r}' \rVert > 0, mL = \int_a^b m\lVert \mathbf{r}' \rVert\,dt \le \int_C f\,ds \le ML, so \displaystyle \frac1L\int_C f\,ds lies between m and M. By the intermediate value theorem \phi(t^*) equals it for some t^*; take \mathbf{P} = \mathbf{r}(t^*).
- Let p_1 and q_1 be antiderivatives of p and q, which exist by the fundamental theorem of calculus, and \Phi(x, y) = p_1(x) + q_1(y). On a smooth piece, by the chain rule, \displaystyle \frac{d}{dt}\Phi(\mathbf{r}(t)) is p(x(t))\,x'(t) + q(y(t))\,y'(t), which is \mathbf{F}(\mathbf{r}(t)) \cdot \mathbf{r}'(t), so the piece contributes \Phi at its end minus \Phi at its start. The sum telescopes to \Phi(B) - \Phi(A), whatever the path.
- Take \mathbf{F} = \langle 1, 0 \rangle and C the unit circle counterclockwise. By Example 6(a), \oint_C \mathbf{F} \cdot d\mathbf{r} = 0, but at (0, 1), \mathbf{T} = \langle -1, 0 \rangle and \mathbf{F} \cdot \mathbf{T} = -1.